You can paint tiles, and on the right surfaces it is a cost effective way to update a dated bathroom, laundry or kitchen. Painted tiles hold up well on walls that get splashes but not constant water or abrasion. They struggle inside shower recesses, on floors and on work surfaces. The difference between a finish that lasts and one that peels in months is the preparation and the paint system.
Why tiles are hard to paint
Glazed ceramic tiles are designed to repel everything, which is exactly what makes them hard to paint. The glaze is smooth, dense and non-porous, so ordinary wall paint has nothing to grip. On top of that, bathroom and kitchen tiles are usually coated in a film of soap residue, body oils or cooking grease, and grout lines hold mould and dirt. Any of these left behind will cause the new coating to fail.
Movement is the other issue. Tiles fixed to walls that flex, or laid over substrate that has been damp for years, can crack or drum, and paint will not hold together something that is already coming loose. Tap the tiles gently before you start: a hollow sound means the tile has lost its bond, and that needs fixing first.
The tile paint system
A durable result needs a full system, not just a topcoat:
- Deep clean: degrease thoroughly, treat any mould in the grout, rinse and let it dry.
- Repair: replace cracked tiles or loose grout and remove failed silicone.
- Scuff sand: dull the glaze with fine abrasive so the primer has a key, then remove all dust.
- Bonding primer: a primer designed for glazed and glossy surfaces, applied as the label directs.
- Topcoats: a hard wearing enamel or two pack tile coating, in the number of coats the system specifies.
- Cure time: leave the surface to harden fully before exposing it to water, cleaning products or steam.
The bonding primer is the step people skip and regret. Our article on painting over gloss explains why slick surfaces need it. Two pack tile coatings generally give the hardest finish but need careful mixing, good ventilation and a strict pot life.
Where painted tiles hold up
- Bathroom walls outside the shower, and above and around vanities
- Laundry walls and the tiles above a laundry trough
- Kitchen splashbacks away from the cooktop's direct heat, wiped gently with a soft cloth
- Toilet walls and dado height tiling in hallways and older homes
These areas get the occasional splash and wipe down, which a cured tile coating handles well.
Where it does not
Inside a shower recess, the coating is soaked and steamed every day, scrubbed regularly and exposed to soap and cleaning chemicals. Even a good system wears, lifts at corners and leaks water behind it there, and failure in a shower can let moisture into places you cannot see. Floors are worse again because of abrasion from shoes and grit. Benchtops take knives, hot pans and constant cleaning. For these surfaces, retiling or a purpose made resurfacing system is the better investment. Our guide to bathroom paints in Adelaide covers the walls and ceilings around the tiled zone.
What the result looks like
Painting changes the colour, not the shape. Grout lines stay visible as slight grooves, and the tile layout still reads through. Many people choose a single colour over both tiles and grout for a simple, even look. Others paint the tiles and then use a grout pen, which takes patience. Painted tiles also lose the hard sheen of glaze, so a semi-gloss or gloss coating gives the closest look to the original.
Painted tiles work best as a medium term solution: tidying a rental, refreshing a home before sale, or buying time before a full renovation. With gentle cleaning and good ventilation, they can look good for years. Expect to touch up chips over time, so keep a little of the topcoat.
If you are weighing it up, our interior painting team can look at your tiles at the site visit and tell you honestly whether paint is a sensible option or whether those tiles are better replaced.